-
SmartSolar MPPT Charge Controller
Marine ElectricalTake charge of your solar system effortlessly with SmartSolar’s remote and a built-in Bluetooth, you can easily pair your device with SmartSolar MPPT charger
-
Tinned Copper Wire, 18 AWG (0.8mm2)
Marine ElectricalHighest quality ultra-flexible (Type 3) tinned copper stranding provides maximum protection against corrosion and electrolysis while resisting fatigue due to vibration and flexing.
-
Inflatable Fender – Heavy Duty: 200 x 1055mm
Boat DockingElevate your boat’s defense with our premium Heavy-Inflatable Heavy Duty Fender Inflatable – Modeled from tough, flexible vinyl, designed to give years of trouble-free mooring.
DiamxLength: 200x1055mm
Buoyancy: 34 Kg
Eye diam: 28mm
Rec. boat size: 30-40 ft. -
SmartSolar MPPT Tr VE. Can
Marine ElectricalThe MPPT VE. Can SmartSolar charger uses the latest and fastest technology to convert energy from a solar array into energy that optimally charges a battery bank. The SmartSolar charge controller will even recharge a severely depleted battery. It can operate with a battery voltage as low as 0 Volts, provided the cells are not permanently sulphated or otherwise damaged.
-
Heavy Duty On-Off Battery Switch
Marine ElectricalHD-Series heavy Duty On/Off battery switch. Rated for 600A continuous and 32V DC max.
-
Stop Swage – Copper
AnchoringExtruded copper swage with single hole, used to produce an end stop on stainless steel wire cables.
-
StripSpeed
Boat MaintenanceStripspeed must be shaken very well before use to evenly distribute key ingredients for performance. In hotter climates (>30°C / 86°F) Stripspeed needs to be
reapplied approximately every 10 minutes to ensure the surface stays ‘wet’. Removes Propspeed etching primer and topcoat in one-step, in 30 minutes or less*.
Timing is subject to atmospheric conditions. Ideal temperature is 15-27°C (60-80°F). -
Large Diameter Drain Plug
Hull/Underwater HardwareBlack, plastic drain plug. Flat flange base for mounting as low as possible on the hull. Washer included for positive seal. Course four point thread to cope with sand and sediment.
-
Heavy Duty Balloon Fenders 405 x 570mm
Boat DockingProtect your yacht or boat with our DAN-FENDER Heavy Duty Balloon Fenders. Engineered for maximum durability and strength, these fenders feature a patented design with a solid rope hold to ensure exceptional performance.
-
Heavy Duty Balloon Fenders 480 x 640mm
Boat DockingProtect your yacht or boat with our DAN-FENDER Heavy Duty Balloon Fenders. Engineered for maximum durability and strength, these fenders feature a patented design with a solid rope hold to ensure exceptional performance.
-
Heavy Duty Inflatable Marker Buoys 160 x 230mm
Boat DockingDAN-FENDER Heavy Duty Marker Buoys can also be used as a mooring buoy by adding a shackle in the rope hole, and directly from the shackle you connect the chain to both the anchor and the boat.
-
Heavy Duty Inflatable Marker Buoys 1100 x 1280mm
Boat DockingDAN-FENDER Heavy Duty Marker Buoys can also be used as a mooring buoy by adding a shackle in the rope hole, and directly from the shackle you connect the chain to both the anchor and the boat.
-
ACR HemiLight 3 Life Jacket Light
SafetyThe ACR Auto HemiLight™3 flashing survival light attaches to almost any style life jacket with a quick and easy installation.
-
Sunbrella Spectrum Eggshell – Sold Per Yard
Awning / UpholsterySunbrella Spectrum Eggshell Marine Fabric: Curtains, Exterior Cushions, Exterior Pillows, Exterior Upholstery, etc.
-
MultiPlus 24V Inverter/Charger
Marine Electrical -
Heavy Duty Balloon Fenders 610 x 790mm
Boat DockingProtect your yacht or boat with our DAN-FENDER Heavy Duty Balloon Fenders. Engineered for maximum durability and strength, these fenders feature a patented design with a solid rope hold to ensure exceptional performance.
-
Heavy Duty Hinge (Nylon)
Deck and Cabin HardwareHeavy Duty Hinge – Solid construction for commercial or heavy-duty applications. Strong U.V. stabilised black nylon with stainless steel pins. Contoured shape has no sharp edges. 8mm thick hinge plates. Sold as a pair.
-
Heavy Duty Inflatable Marker Buoys 810 x 1040mm
Boat DockingDAN-FENDER Heavy Duty Marker Buoys can also be used as a mooring buoy by adding a shackle in the rope hole, and directly from the shackle you connect the chain to both the anchor and the boat.
-
Inflatable Fender – Heavy Duty: 550 x 1465mm
Boat DockingElevate your boat’s defense with our premium Heavy-Inflatable Heavy Duty Fender Inflatable – Modeled from tough, flexible vinyl, designed to give years of trouble-free mooring.
DiamxLength: 550 x 1465mm
Buoyancy: 215 Kg
Eye diam: 32mm
Rec. boat size: 70 – 100 ft. -
Sunbrella Beige – Sold Per Yard
Awning / UpholsteryMarine Fabric: Awnings, Biminis, Boat Covers, Dodgers, Exterior Cushions, Sacrificial Sail Covers, Sail Bags, Sail Covers. Sold Per Yard
-
Matic SuperSwitch Float Switch 20AMPS
Marine PlumbingThe Rule 37A float switch is design to prevents the rapid on/off cycling. Mercury Free! Max current 20A. Rule 37A float switch design prevents rapid on/off.
-
Barrel Bolt
Deck and Cabin HardwareStainless steel barrel bolt designed for boats and marine use. Easy-to-install lock perfect for securing doors, hatches, and cabin compartments. Durable construction ensures longevity and reliability
-
Nereus I Double Kayak Tandem Sit on top
Water Fun RidesThe Nereus can take two adults and one child comfortably on board or be used as a single by simply moving the backrest to the center position.
-
Female Locking Connector 50A 125/250V
Marine ElectricalMarinco® 50 Amp 125 / 250V Female Locking Connector ideal for those looking to attach to a boat inlet or cordset.
-
Large Combo Deck Brush Soft & Medium
Boat MaintenanceBelow the water line and other tough surfaces Shurhold’s series of 10 inch (25 cm) deck brush easily and positively lock into any Shurhold handle.