Name: StripSpeed
SKU: 20382
Availability: InStock

StripSpeed

Stripspeed must be shaken very well before use to evenly distribute key ingredients for performance. In hotter climates (>30°C / 86°F) Stripspeed needs to be
reapplied approximately every 10 minutes to ensure the surface stays ‘wet’. Removes Propspeed etching primer and topcoat in one-step, in 30 minutes or less*.
Timing is subject to atmospheric conditions. Ideal temperature is 15-27°C (60-80°F).

Developed to help Propspeed applicators to prepare metal surfaces for reapplication, Stripspeed removes foul-release coatings in 30* minutes or less. The thick consistency easily hangs on vertical and overhead surfaces, making it easy to use and there is no mixing required. Just shake, pour and go. Stripspeed is non-flammable, non-caustic, DCM and NMP free. Unlike grinding or using abrasives, Stripspeed doesn’t cause mechanical wear through multiple refits, and doesn’t create airborne particles or debris, increasing the lifetime of the metal.

Save time and money on Propspeed applications with Stripspeed!

*Timing is subject to atmospheric conditions. Ideal temperature is 15-27°C (60-80°F)