All Marine plumbing related products
-
Square Bilge Pump 1000 – 12 VDC
Marine PlumbingThis Heavy Duty bilge pump from Rule features a rugged housing and high pumping capacity. This variant is best suited for smaller vessels. Output: 63 l/min. Voltage: 12 V.
-
Bilge Pump 800GPH 12V Non-Automatic
Marine PlumbingRule Bilge Pumps feature compact, efficient long-life motors with the ability to run dry for short periods of time. Each pump houses an easy-clean, snap-lock strainer base, marine-grade blocked housing, and a stainless steel shaft. Completely submergible. Flow Rate: 800 GPH, Port Type: 3/4″ Hose, Voltage: 12V DC.
-
Matic Float Switch 14AMPS
Marine PlumbingThe Rule 37A float switch design prevents rapid on/off cycling. Mercury Free! Max current 20A.
-
TruDesign Long Thread Tails
Marine PlumbingMade in NZ, TruDesign Long Thread Tails offer strong, stable hose-to-fitting connections using glass-reinforced nylon. Designed for twin hose clamps.
-
Bilge Pump Automatic 500 Submersible
Marine PlumbingThe Bilge Pump Submersible 12 volt DC: a compact, fully automated solution for smaller vessels.. Especially popular on smaller craft, Rule 500 pumps are unmatched in pumping power and longevity. 3/4” (19mm) discharge outlet. 12 Volts DC unless noted.
-
Bilge Pumps Non-Automatic
Marine PlumbingOur Standard Bilge Pumps are engineered with snap-lock strainer bases allowing for easy access to clean the strainer and impeller cavity. They also feature a non-return valve that prevents water left in the discharge from running back, keeping bilges dryer and cleaner.
-
Skin Fitting Installation Tool
Marine PlumbingTruDesign Skin Fitting Install Tools allow for single-person installation of skin fittings, eliminating the need for a second person to hold the fitting in place. The tools also simplify the application of sealant and keep work areas clean.
-
Bilge Pump 500GPH Non-Automatic
Marine PlumbingOur Standard Bilge Pumps are engineered with snap-lock strainer bases allowing for easy access to clean the strainer and impeller cavity. They also feature a non-return valve that prevents water left in the discharge from running back, keeping bilges dryer and cleaner.
-
Bilge 360 Pump/Switch 12V
Marine PlumbingRule Bilge Pump 360GPH 12V, 3/4″ Hose Discharge Port, Non-Automatic, 2.1 Amp Draw, Easy Clean Snap Lock Strainer Base, Rule-A-Matic Mercury Free Float Switch
-
Bilge Pump 3700 Non-Automatic
Marine PlumbingOur Standard Bilge Pumps are engineered with snap-lock strainer bases allowing for easy access to clean the strainer and impeller cavity. They also feature a non-return valve that prevents water left in the discharge from running back, keeping bilges dryer and cleaner.
-
Bilge Pump 800GPH Non-Automatic
Marine PlumbingOur Standard Bilge Pumps are engineered with snap-lock strainer bases allowing for easy access to clean the strainer and impeller cavity. They also feature a non-return valve that prevents water left in the discharge from running back, keeping bilges dryer and cleaner.
-
SPX Flow Johnson Pump – Submersible Bilge Pump
Marine PlumbingOur Submersible Bilge Pump incorporate some of the most advanced Features in the industry, Features developed from service in a wide variety of uses including racing, cruising, sport fishing and demanding commercial duties
-
Portable Pump Kit
Marine PlumbingVersatile 12-volt submersible pump with hose and nozzle. Suitable for cold and warm water, diesel, light oils, detergents and most pesticides. Not suited to petrol, highly flammable or corrosive liquids.
-
Skin Fitting Domed BSP
Marine Plumbing“Skin Fitting Domed” is a high-performance through-hull solution made in New Zealand from a glass-reinforced nylon composite for strength, stiffness, and weight reduction compared to metallic fittings.
-
Compact Deck Shower RT3000
Marine PlumbingThis easy-to-use compact deck shower is the simple deck shower solution. The shower boasts high performance levels while the one touch trigger allows effortless control and uses high quality marine grade materials ensuring reliability. The shower is also simple to install with an angled holder and is virtually maintenance free.
-
Matic SuperSwitch Float Switch 20AMPS
Marine PlumbingThe Rule 37A float switch is design to prevents the rapid on/off cycling. Mercury Free! Max current 20A. Rule 37A float switch design prevents rapid on/off.
-
Skin Fittings with Tail
Marine PlumbingTruDesign Skin Fittings with Tail offers a superior composite thru-hull solution. The body and nut of the Skin Fitting with Tail are molded from glass fiber-reinforced nylon composite.
-
Rulemate Automatic Bilge Pump 12V
Marine PlumbingOur bilge pumps provide ultimate pumping performance, which helps keep your bilge clear of nuisance water. Our bilge pumps are engineered and tested to the highest standard, achieving rated performance at 12V, resulting in high flow with best-in-class efficiency for the toughest applications.
-
Bilge Pump 360 GPH
Marine PlumbingOur bilge pumps provide ultimate pumping performance, which helps keep your bilge clear of nuisance water, building on the genuine Rule design.
-
Compact Shower
Marine PlumbingOff white U.V. stabilised polypropylene body and cover can easily be mounted on most common surfaces. ABS shower handset body with removable rose for cleaning and brass on/off valve with stainless steel return spring. Suitable for cold water only with 2 metres of hose attached.
-
TruDesign Ball Valve BSP
Marine PlumbingThe Ball Valve body is made of glass-reinforced nylon composite for lightweight, corrosion-free operation. It has PTFE sealing for smooth, long-lasting action. It can be locked and closed in BSP and NPS thread forms for toilet waste outlets.
-
Bilge Pump 1100GPH Non-Automatic
Marine PlumbingOur Standard Bilge Pumps are engineered with snap-lock strainer bases allowing for easy access to clean the strainer and impeller cavity. They also feature a non-return valve that prevents water left in the discharge from running back, keeping bilges dryer and cleaner.
-
Load Bearing Collars
Marine PlumbingTruDesign Load Bearing Collars are designed to be used with TruDesign Skin Fittings and Ball Valves. They enable the Skin Fitting-Ball Valve-Hose Tail assembly to withstand a 500 lb (227 kg) static force applied to the Hose Tail end of the assembly for a minimum of 30 seconds, in compliance with North American ABYC H-27 standards.
-
Bilge Pump Automatic 12V
Marine PlumbingOur bilge pumps provide ultimate pumping performance, which helps keep your bilge clear of nuisance water. Our bilge pumps are engineered and tested to the highest standard, achieving rated performance at 12V, resulting in high flow with best-in-class efficiency for the toughest applications.
