Prop Shaft Anode
Prop Shaft Anode – Made to fit tightly around the entire propeller shaft. Prevents screws from falling out during installation. Streamlined football shape minimizes turbulence and drag.
Prop Shaft Anode – Streamlined shaft collars provide cathodic guard for propeller shafts with Mil Spec anode for a tight fit to the shaft.
These zinc prop shaft anodes are high quality pressure die-cast and provide effective and inexpensive protection for your boat in salt and brackish water. Two stainless steel slot-head screws with lock washer and hex nut are used to lock the anode halves around the shaft. The stainless steel hex nut is pressed into the anode body.
| Type Number | A – Shaft | B – Diameter | C – Length |
|---|---|---|---|
| MDX-1 | 3/4″ (19mm) | 2-1/8″ (54mm) | 2-1/8″ (54mm) |
| MDX-2 | 7/8″ (22mm) | 2-1/8″ (54mm) | 2-1/8″ (54mm) |
| MDX-3 | 1-0″ (25mm) | 2-1/8″ (54mm) | 2-1/8″ (54mm) |
| MDX-4 | 1-1/8″ (29mm) | 2-1/8″ (54mm) | 2-1/2″ (64mm) |
| MDX-5 | 1-1/4″ (32mm) | 2-3/8″ (60mm) | 2-1/2″ (64mm) |
| MDX-6 | 1-3/8″ (35mm) | 2-1/2″ (64mm) | 2-1/2″ (64mm) |
| MDX-7 | 1-1/2″ (38mm) | 2-1/2″ (64mm) | 2-1/2″ (64mm) |
| MDX-8 | 1-3/4″ (44mm) | 3-1/4″ (83mm) | 2-7/8″ (73mm) |
| MDX-9 | 2″ (51mm) | 3-1/4″ (83mm) | 2-7/8″ (73mm) |
| MDX-10 | 2-1/4″ (57mm) | 4-1/4″ (105mm) | 3-3/4″ (95mm) |
| MDX-11 | 2-1/2″ (64mm) | 4-1/4″ (105mm) | 3-3/4″ (95mm) |
| MDX-12 | 2-3/4″ (70mm) | 4-3/4″ (121mm) | 3-5/8″ (92mm) |
| MDX-13 | 3″ (76mm) | 4-3/4″ (121mm) | 3-5/8″ (92mm) |
Related products
-
Large Diameter Drain Plug
Hull/Underwater Hardware -
Anode Max Prop Nut
Hull/Underwater Hardware -
Rudder Trim Tab Zinc Anode
Hull/Underwater Hardware
