Rudder Trim Tab Zinc Anode
Two-piece, pancake-style zinc anode for rudders and trim tabs.
Rudder Trim Tab Zinc Anode - 6-7/8"
Two-piece, pancake-style zinc anode for rudders and trim tabs. Whether your boat is sailing in either fresh or sea water is inevitably exposed to the hazards of corrosion.
All zinc rudder anodes include copper contacts for permanent ground and stainless screws with washer retainers. Zinc rudder anodes weigh more than the competition, due to their higher quality and perform their cathodic protection job better. Rudder Trim Tab.
- A stainless-steel nut is pressed into one piece.
- A stainless-steel socket cap screw (Allen head) connects the two halves together
| DIAMETER | THICKNESS OF ONE-HALF | WEIGHT | BOLT SIZE | HEX |
6-7/8″ | 7/8″ | 8.4 lbs | 5/16″ x 2-1/2″ | 1/4″ |
Related products
-
Prop Shaft Anode
Hull/Underwater Hardware -
Anode Max Prop Nut
Hull/Underwater Hardware -
Large Diameter Drain Plug
Hull/Underwater Hardware
